Setting Up VSCode on MacOS

These instructions were created on 9/16/2025 for macOS Sonoma (Version 14.6.1) targeting VSCode Version 1.93.1.

Obtaining VSCode

The easiest way to obtain VSCode is from their website. Select the version you want, download it, open the downloaded file, and copy the application to the Applications directory.

Setup From Fresh Install

When you start up VSCode you’ll be greeted with the “Get Started with VS Code” screen.

• Pick your preferred theme.

• Pick your languages. We want the C/C++, and Python language extensions.
  • If you have not previously installed “command line developer tools” follow the prompts.

• Tune your settings. Click “Open Settings”.
  • Recommended to enable backup and sync settings. If you want do this then sign in before changing any options.

• Settings to consider (you can search for them to quickly find them):
  • Files: Auto Save
  • Editor: Rulers (we’re sticklers for 80 character lines)
  • CMake: Options: Status Bar Visibility (set to visible)

Note: With setting synching on make sure you don’t set any user setting to a workspace specific path or it will be set across all your accounts.

• At this point you’re free to follow the remaining “Get Started” steps, but VSCode is mainly interested in showing you how to start a new project and we want to use an existing one.

Creating an NWChemEx Development Environment

Now that you have VSCode initialized we will create a development environment, or as VSCode calls it, a “workspace”. Workspaces reside in directories so go ahead and create the directory for the workspace now. We recommend something like /Users/your_username/nwchemex (you can create the directory in Finder or via terminal). The remainder of this tutorial refers to this directory as the “workspace directory”.

Adding Repositories

Step 1. Switch to the source control view (if it’s not there go to "View"->"Source Control"). (If you have files open you will instead see the source control for those files. To add a repo close the files or skip ahead to step 9).

• If you have not previously installed git see here (if you click on “Download Git for macOS”, it’ll just redirect you to git’s website which will duplicate our instructions). Once git is installed, click reload in the source control view.

Step 2. (With git installed) click “Clone Repository”.

Step 3. Click “Clone from Github”.

Step 4. If asked, allow the GitHub extension to sign in.

Step 5. You should now see all the repos you have. Search for the one you want. For sake of the tutorial search for NWChemEx/.github, i.e., this repo.

Step 6. That will bring up Finder. Select the workspace directory as the destination.

Step 7. When prompted open the repository.

Step 8. If prompted, decide whether you trust us (we’ll assume you do and click yes).

Step 9. Once there are files in your workspace the souce control view will change to allow you to interact with the version control of the open files. Unfortunately, this means we can not add additional repositories the same way we did in Step 2. Rather, you need to use the command palate (command + shift + P) then search Git: Clone. That will return you to Step 3 above, with the caveat that what was Step 7 should be replaced by Step 10 below.

Step 10. Since you have files in your workspace already the dialog box from Step 7 will change and you will want to select “Add to Workspace” instead of “Open”.

Step 11. Repeat Steps 9 and 10 until you have all the repositories you want. Once you are done save your workspace by going to File->"Save Workspace As...". We recommend saving it into the nwchemex workspace directory and naming it as nwchemex.code-workspace.

Note: If you choose a repository containing C++ source code, e.g., NWChemEx/chemist, VSCode may prompt you to select a kit. Instructions for this are below. To get this to go away for now just click “unspecified” or press esc.

Creating a CMake Toolchain File

CMake relies on toolchain files to pass configuration variables to dependencies.

Note: We suggest putting the toolchain in the workspace directory and not in any of the repositories. Unfortunately, this means we can’t use VSCode’s editor to create/edit the file (VSCode will only let us create/edit files in the repository directories we downloaded). Thus, if you put it in the workspace you’ll have to use an external editor to write the file.

1. In the directory of you choice, create a new file toolchain.cmake.
2. Modify the toolchain file. Syntax is set(<name_of_variable> <value>). Some variables you may want to include are:
   • NWX_MODULE_DIRECTORY. Set this to where you want plugins and modules to be installed to.
   • CMAKE_CXX_STANDARD. Set this to 17 if for some reason your C++17 compliant compiler doesn’t at least default to 17 being enabled.
   • BUILD_TESTING. To build the unit tests.

An example:

set(NWX_MODULE_DIRECTORY /path/to/your/workspace/directory)
set(CMAKE_CXX_STANDARD 17)
set(BUILD_TESTING TRUE)

Setting up Kits

Kits are sets of tools to use to build the code. They are usually named based on the compiler you want to use. Since MacOS ships with Clang, this tutorial assumes you have Clang and are creating a Clang kit.

Note: This tutorial assumes you have set the setting cmake.options.statusBarVisibility to visible.

Step 1. Click on No active kit. If you had previously selected a kit, this may instead display the name of that kit.

Step 2. Select Clang <version goes here>.

Note: Depending on your VSCode settings, selecting your kit will immediately start a CMake configuration run. Since we’re not done setting up, it will likely fail…

Step 3. If you want to always use the same options with the same tool kit (e.g., always use Ninja generator), you can edit the tool kit file. To do this, open the command palette (command + shift + P) and search for Edit User-Local CMake Kits.

Step 4. If we want to always use the same toolchain file with the same toolkit, we can edit the kit to know about the toolchain file. Add "toolchainFile": "<path/to/the/toolchain>" to your kit.

Note: This step assumes you did not skip the :ref:creating_a_cmake_toolchain_file section.

Another good idea, assuming you have Ninja installed (brew install ninja) is to add it to your kit via:

"preferredGenerator": {
  "name": "Ninja"
},
"environmentVariables": {
  "PATH": "/opt/homebrew/bin;${env:PATH}"
}

Configuring a Project

Step 1. If you have multiple git projects open, make sure you select the one you want to configure.

Step 2. Click CMake: [Debug]: Ready to start configuring.

Step 3. Select the configuration you would like.

Troubleshooting

• If you get an error about the CMake executable like below, it most likely means you do not have CMake installed (see obtaining_dependencies_on_macos for instructions) or VSCode can not find CMake. To set the CMake executable open the command pallette (command + shift + P) and search for cmake.cmakePath.

• If you get an error about NWX_MODULE_DIRECTORY not being set, it either means you did not pass your toolchain to CMake (see creating_a_cmake_toolchain_file) or you did not set NWX_MODULE_DIRECTORY in your toolchain file.

• If the configuration fails because of a missing dependency consult this page.

Building and Testing

Note: We assume you have setup a kit already. If not see :ref:setting_up_kits.

Step 1. Set the project, build configuration, and kit to what you want.

Step 2. Click build.

Step 3. Assuming Step 2 is successful, click on “Run CTest” to run the test suite.

Committing Changes Back to GitHub

Note: This section assumes familiarity with git terminology.

Step 1. Switch to the source control view.

Step 2. (Optional) select the file(s) you want to stage by clicking on the “+” next to the file(s). If you do not stage files VSCode will assume you want to commit all changed files.

Step 3. Type a descriptive commit message.

Step 4. Click on the commit button. At this point your changes are only committed to your local copy of the repository. We still need to push them to GitHub.

Step 5. Once you click “Commit” the button should change to “Synch Changes”. Click that to push your changes to GitHub.

Troubleshooting

If you get an error about user.name and/or user.email for git is not set. i.e., something like:

The easiest way to fix this is to open a terminal (the one in VSCode works fine) and run:

git config --global user.email "your email goes here"
git config --global user.name "your name goes here"

For example:

When attempting to synchronize with GitHub, if you get a cryptic error like:

For me this was caused by a credentials issue. I simply ran git push from the VSCode terminal (in the root directory of the repo) and gave permission to VSCode to use my passwords. From that point forward commit and synchronization worked fine from VSCode.